工程制图（英文版）

Introduction
Chapter 1 Basic Knowledge of Engineering Drawing
1.1 General Provisions in National Standards
1.2 Drawing Tools and Their Utilization
1.3 Geometric Construction
1.4 Analysis and Drawing of 2D Picture
Chapter2 Projection of Basic Elements
2.1 Principles of Orthographic Projection
2.2 Projection of Points
2.3 Projection of Lines
2.4 Projection of Planes
Chapter 3 Basic Solids and Their Intersections
3.1 Polyhedral Solids
3.2 Curved Solids
Chapter4 Composite Solids
4.! Analysis of Composite Solids
4.2 Drawing Method and Procedure of Composite Solids
4.3 Axonometric Projection
4.4 Reading Views of Composite Solids
4.5 Dimensioning Composite Solids
Chapter 5 Representation Methods of Drawings
5.1 Views
5.2 Sections
5.3 Cuts and Other Representation
Chapter 6 Standard Parts and Commonly Used Parts
6.1 Threads
6.2 Screw Fasteners
6.3 Commonly Used Parts
Chapter7 Detail Drawings
7.1 Detail Drawing Contents
7.2 Manufacture Process Structure
7.3 Technical Requirements
7.4 Choosing Views and Dimensioning of a Part
7.5 Part Measurement
7.6 Detail Drawing Interpretation
Chapter8 Assembly Drawings
8.1 Contents of Assembly Drawings
8.2 Representation Methods of Assembly Drawings
8.3 Rationality of Fitting Structures
8.4 Interpreting Assembly Drawings
Chapter 9 Brief Introduction toAutoCAD
9.1 The User Interface
9.2 Drawing and Editing Techniques
9.3 Auxiliary Function
9.4 Dimensioning
9.5 Constructing 3D-solids Using AutoCAD
Appendices
References