Preface
1 Elevator control system overview1
1.1 Elevator electrical control system composition 1
1.2 Elevator control system working principle · 4
2 General knowledge of the integrated drive controller 10
2.1 Scope of application 10
2.2 Model description 10
2.3 The technical specification of integrated drive controller· 12
2.3.1 Technical specification · 12
2.3.2 Main features· 12
2.4 Notice items for safety 18
2.5 Operation notice 20
2.5.1 Brake resistor selection 20
2.5.2 Absorber at the output side prohibited 20
2.5.3 The application voltage of integrated device · 22
2.5.4 Two-phase input not allowed · 22
2.5.5 Altitude and derated application 22
2.5.6 Low voltage directive complies 23
3 Basic functions of elevator with intelligent controller 24
3.1 Function list 24
3.2 Elevator operation function description and setting method 26
3.2.1 Standard function description 26
3.2.2 Optional function description 33
4 Wiring and working principle of elevator integrated drive controller · 36
4.1 The system chart for the integrated drive controller
and peripheral equipments 37
4.2 Notice items for peripheral equipments connection· 37
4.2.1 Power supply· 37
4.2.2 Breaker ·37
4.2.3 AC reactor at the input side 37
4.2.4 Interference filter at the input side39
4.2.5 Main circuit output contactor·39
4.2.6 Interference filters at the output side ·39
4.2.7 AC reactor at output side ·39
4.2.8 DC reactor 39
4.3 The technical requirements for wire arrangement of
peripheral equipments of the elevator integrated drive controller 39
4.3.1 The cable requirement of hoist way and accompanying cable
arrangement39
4.3.2 Method of wiring between call board and TXV+、TXV-、
TXA+、TXA- ·41
4.3.3 Hoist way switch position42
4.3.4 Upper and lower leveling inductor43
4.4 Main circuit terminal wiring44
因篇幅原因，以下略
鄂公网安备 42010302001612号 