搅拌摩擦焊接与处理

Chapter 1 Friction stir welding and processing
1.1 Friction stir welding
1.2 Friction stir processing
1.3 Deformation-driven metallurgy
References
Chapter 2 Self-supported friction stir welding
2.1 Introduction
2.2 Bobbin tool friction stir welding
2.3 Penetrating friction stir welding
2.4 Self-support friction stir welding
2.5 Plastic deformation analysis of SSFSW1 joint
2.6 Prospects
References
Chapter 3 Non-weld-thinning friction stir welding
3.1 Stationary shoulder friction stir welding
3.2 Additive friction stir welding
3.3 Zero-plunge-depth friction stir welding
References
Chapter 4 Friction stir-based remannfacturing
4.1 Background
4.2 Principle and advantages
4.3 Types of FSW defects
4.4 Repetitive friction stir remanufacturing
4.5 Additive friction stir remanufacturing
4.6 Prospects
References
Chapter 5 High depth-to-width ratio friction stir welding
5.1 Numerical design of high depth-to-width ratio friction stir welding
5.2 Joint formation mechanism of high depth-to-width ratio friction stir welding
5.3 Grain growth behavior of high depth-to-width ratio friction stir welding
References
Chapter 6 Entire-process simulation of friction stir welding
6.1 Experiments and simulation
6.2 Implementation of neural networks
References
Chapter 7 Surface modification via friction stir processing
7.1 Surface composite fabricated by direct friction stir processing
7.2 Cryogenic surface-grinding assisted friction stir processing
7.3 Arc surface-nitriding assisted friction stir processing
References
Chapter 8 Friction stir processed bulk materials
8.1 Microstructural evolution and mechanical properties of Mg-Zn-Y-Zr alloy during friction stir processing
8.2 Dynamic recrystallization and mechanical properties of friction stir processed Mg-Zn-Y-Zr alloys
8.3 Uhrafine-grained Mg-Zn-Y-Zr alloy with remarkable improvement in superplasticity
8.4 Enhanced strength and ductility of friction-stir-processed Mg-6Zn alloys via Y and Zr co-alloying
8.5 Strengthening and toughening mechanisms of CNTs/Mg-6Zn composites via friction stir processing
References
Chapter 9 Graphene nanoplatelet-reinforced aluminum matrix composites
9.1 Feasibility verification of deformation-driven metallurgy
9.2 Ameliorating strength-ductility efficiency of graphene nanoplatelet- reinforced aluminum composites